|
In this round of installation with the Hummer we added an Alpine F1 processor to the dash, made enclosures for the Dynaudio Midranges in the dash, mounted video screens in each headreast, rebuilt the dash to hold a screen, made a new switch panel to control neon etc, and a made a new panel to hold the air suspension control box. All this followed the same theme, carbon fiber trimmed in yellow painted fiberglass.
|
|
|
The dash
This view shows most of the dash. Up top we see the F1 processor. Below that on the drivers side is the F1 processor's display, on the passenger's side is an Alpine DVD player. The Dynaudio components now have their own sealed enclosures. This view also shows the passangers dash with new widescreen monitor. |
|
|
Lot's of bass.
A view from the back seat showing the center of the dash, display and DVD player
|
|
|
Passanger dash
The passanger side dash was completely rebuilt to hold an Alpine widescreen monitor then recovered with factory Hummer vinyl and trimmed with fiberglass and carbon fiber. |
|
|
Headrests
The same Alpine widescreen monitors used up front were flushed into each headrest then again trimmed with fiberglass and carbon fiber
|
|
|
Switchpanel
A new panel was constructed and mounted under the dash to control neon both inside and under the truck, fans, lights etc and again trimmed in carbon fiber and yellow |
|
|
Suspension controller
The trucks new air suspension kit controller was mounted under the dash in and again trimmed in carbon fiber and yellow.
|
|
|
|
